Whether your uPVC handle has dropped, your timber door lever is worn, or your front door handle has snapped off — we carry common handle sizes and replace them in a single visit. Fixed price before we start. No call-out fee.
Typical Prices
Average Response Time
Serving South London
Five-Star Google Reviews
Door Handle Repairs

Most door handles in South London fail for one of three reasons: the internal spindle wears down, the spring mechanism snaps, or a failing multipoint gearbox causes the handle to feel floppy. Getting the diagnosis right matters — replacing only the handle when the gearbox has failed wastes your money and leaves the fault unresolved.
We carry a range of uPVC and timber door handle sizes on every van. Our City & Guilds qualified locksmiths measure your existing handle, match the spindle size, and fit a replacement in 30–45 minutes. We give you a fixed price before touching anything — no hourly rates, no call-out charge.
South London's Victorian and Edwardian terraced houses use timber mortice door handles, while newer builds and council conversions have uPVC multipoint systems. We work on both — across Clapham, Streatham, Croydon, Lewisham, Balham, Tooting, and the surrounding areas.
When a uPVC door handle drops, the multipoint locking mechanism may no longer engage properly. What looks like a minor inconvenience can mean your door is not actually locked — even if you turned the key. Never assume a dropped handle equals a locked door.
Do not leave the property unattended until the handle is repaired.
If a uPVC or composite door handle is stiff, requires extra force, or you hear grinding, stop using it immediately. Forcing a handle with internal wear rapidly destroys the gearbox mechanism. A door handle job can turn into a £350 gearbox replacement if you persist.
Stop using the handle and call for a diagnosis before it gets worse.
Fitting a replacement handle with the wrong spindle length is one of the most common DIY mistakes. Too short and the latch won't engage; too long and it binds in the door. Getting locked out after a DIY repair attempt requires an emergency locksmith call-out on top of the parts cost.
Always confirm the correct spindle size before fitting a replacement.
Handle problem? Get it diagnosed correctly first.
We identify the exact fault over the phone — free, with no obligation to book.We replace handles on every door type found in South London homes
The most common handle in South London's newer builds and council properties. uPVC handles drive a multipoint gearbox — a failed gearbox makes the handle floppy even when the handle itself is fine. We diagnose and replace only what's needed, usually ERA, GU, or Mila mechanisms.
Victorian and Edwardian terraced houses across Clapham, Streatham, and Lewisham typically have lever handles fitted to a mortice lock. Worn levers lose their return spring. We replace the handle set without touching the mortice lock underneath — a clean, fast repair.
Composite front doors from brands like Rockdoor and Solidor use branded multipoint handles. We carry replacement handles for the most common composite brands and can source less common spindle sizes within 24–48 hours. Always fitted to manufacturer spec.
Patio and bifold door handles sit on espagnolette mechanisms that can seize or lose spring tension over years of use. We repair or replace patio door inline levers, lift-and-slide hardware, and bifold inline handles across South London. Same-day service on most styles.

Most handle replacements are completed in a single visit, under 45 minutes
Tell us your door type and describe the fault. We give you a fixed price for common replacements over the phone, or confirm it on arrival before starting. No surprises, no hourly rates.
Our locksmith arrives within 30 minutes. We remove the old handle, measure the spindle centres, and check whether the gearbox is contributing to the fault. We replace only what has failed.
We fit the replacement, test through 10 full lock-and-unlock cycles, and confirm the door latches from both inside and outside. 12-month guarantee on all handle work.


Any of these symptoms? Call us — most are fixed on the first visit
Your handle sits at 45° and the door won't lock properly. The internal spring or gearbox spring has failed. The most common handle call we receive across South London.
You lift the handle, it operates the lock, but won't return to horizontal. The return spring is broken. Left unfixed, the door will eventually fail to hold the latch closed.
The fixings have worked loose, or the spindle has worn down. The handle moves independently of the mechanism — a security risk, especially on a front or back door.
The lever or plate has physically broken, often after repeated forcing. We carry replacements for the most common styles and can usually fit same day.
The mechanism is seized, often from a dropped door misaligning the hooks. We realign the door and diagnose whether the gearbox also needs replacing.
A higher-quality lever handle with a hardened plate and anti-snap cylinder strengthens the most common point of forced entry. We advise on BS3621-compliant hardware at no extra charge.
30-minute response to all postcodes listed below — 24/7, including weekends
Not sure if we cover your area? Call us — if you're in South London, we almost certainly do. We serve 30+ postcodes with a 30-minute response time.
Check Your Area — 0208 050 2017Find Us on Google
Mobile service covering every SW, SE, CR, SM and BR postcode. We come to you — typically within 30 minutes.
0208 050 2017 — 24/7, every day
Open 24 hours — Mon to Sun, 365 days a year
All South London: SW, SE, CR, SM, BR postcodes
No hourly rates. No hidden call-out charges. Price confirmed before we touch anything.
Prices confirmed on arrival if your door requires a non-standard spindle spacing or branded composite handle. We never start work without your approval.
Most door handle problems have a simple cause. Run through these in 60 seconds — then call us if still stuck.
The spindle is the square metal bar connecting both handles through the door. If it has snapped, bent, or slipped out of the latch mechanism, the handle will feel loose or spin freely with no resistance.
If the spindle is snapped: this is a part we carry and can replace in minutes.
On lever and bar handles, a small spring forces the handle back to horizontal after you press down. If the handle drops and won't return, the spring may be worn. Try lifting the handle while turning the key — if the door opens, the spring is the issue, not the lock.
A spring failure is safe short-term — but replace within a week to avoid being locked out.
On uPVC multipoint doors, the handle operates a gearbox that drives multiple locking points up and down. If the handle turns but nothing moves inside, or the door won't lift to lock, the gearbox may have worn — especially after 8–10 years of use.
Gearbox replacement costs more than a handle swap but is still a same-day fix.
Still not sure what's wrong? Describe the problem to our locksmith over the phone — free diagnosis, no call-out fee until we're with you.
“The handle on our Victorian front door had been drooping for months. They arrived within 40 minutes, had the right spindle bar, and it was done in under 30 minutes. Real professionals — really knew their stuff about period properties.”
Handle & Spindle Replacement“Our uPVC back door handle snapped clean off on a Sunday morning. Called at 8am, locksmith arrived by 9am with a replacement. Explained the gearbox issue while he worked. Really honest — no upselling. Would 100% use again.”
uPVC Handle Replacement“I couldn't lift the handle to lock the door from inside. Turns out the gearbox mechanism had worn through. New gearbox fitted same day, cheaper than I expected. Very tidy workmanship — didn't leave a single screw out of place.”
Gearbox & Handle Repair“The composite door handle on my new-build wasn't springing back. Called in the evening, technician came next morning, diagnosed a snapped return spring, replaced it along with the handle for the same price quoted over the phone. Brilliant service.”
Composite Door Handle“Elderly mum couldn't use her front door handle — it had worked loose over time. The locksmith not only replaced it but fitted a larger lever-style handle that's much easier for her to use. Really thoughtful service, highly recommend.”
Accessible Handle Upgrade“Had the patio door handle replaced — the sliding mechanism had seized. Arrived promptly, stripped out the old handle, fitted a quality brand replacement and lubricated the track. Door glides perfectly now. Reasonable price too.”
Patio Door HandleEverything you need to know about door handle replacement in South London.
uPVC multipoint handles start from £150 and timber and mortice handles from £150, both including parts and labour. Composite door handles start from £90. If the gearbox mechanism also needs replacing, expect £280–£350 all-in. We always quote a fixed price before starting — no surprises.
Yes, in the vast majority of cases. We carry a wide range of standard replacement handles, spindles, springs, and gearboxes for uPVC, composite, timber, and patio doors. Most handle replacements are completed within 30–60 minutes of arrival. We cover all of South London 7 days a week, including evenings and weekends.
A dropped uPVC handle usually means the return spring has worn or snapped. If you can still lift the handle manually to engage the multipoint locks, the door remains secure short-term. However, if the locking points won't engage, the door is NOT secure and you should not leave the property unattended. Call us for a same-day repair — this is one of our most common South London call-outs.
Usually not. The handle, spindle, and locking mechanism are separate components. In most cases a broken or dropped handle can be replaced without touching the lock cylinder or locking points. The exception is when a failed gearbox has damaged the locking mechanism — in that case we replace the gearbox and handle together, which is still far cheaper than a full door replacement.
The most common spindle size in the UK is 8mm square. However, door thickness and handle backset distance vary, so spindle length can range from 70mm to 130mm. Our locksmiths measure on-site and carry multiple sizes. Describing or sending a photo of the old handle before we attend means we can confirm the right replacement — saving a second trip.
We stock handles in the most common finishes: satin nickel, polished chrome, antique brass, and matt black. For period properties in areas like Dulwich or Clapham where matching Victorian-style furniture is important, we can often source a close match on the same day. For very specific heritage finishes, we discuss options and timescales honestly upfront.
Signs the gearbox has failed: the handle turns but the locking rods inside the door don't move, you hear grinding or crunching when operating the handle, or the door won't lift to lock even with a new handle fitted. A quick check: remove the handle and operate the spindle with pliers — if the mechanism still doesn't engage, the gearbox needs replacing, not just the handle.
Yes. We replace handles on sliding patio doors (including inline sliding handles and espagnolette bolts), bi-fold doors, and French casement doors throughout South London. These handles can seize due to track misalignment or gearbox wear. We carry replacement handles for the most common brands including Patio Pac, Hoppe, and MACO.
Our locksmiths are available 24/7 — call for free advice with no obligation.
020 8050 2017Door handle replacement across every South London borough — usually within 30–60 minutes of your call.
Not listed above? Call us anyway — we cover the full Greater London area and neighbouring Surrey postcodes including Kingston, Richmond, and Epsom.
From a dropped uPVC handle to a snapped composite mechanism — we carry the parts, we know the doors, and we're in South London now. Call for a free diagnosis and a fixed price before we attend.